- Impact absorption
- Damped oscillation
- Precise angle tuning
- High adaption range
- Long supporting surface for the saddle frame
- Carbon fiber head being connected to the full carbon tube
- Intended usage: CC / Marathon, Downhill, Enduro, Gravel, Road, Trail
- Diameter (mm): 27.2
- Length (mm): 400
- Seatpost material: Carbon fibre
- Weight (g): 231
- Screw material: Titanium
- Color: Carbon-frosted
- Min. insert length (mm): 140
Order number: 142381
Next expected delivery in calendar week: 52-2019
Prices incl. VAT plus shipping costs
Awards and seals of quality
Bike: Super - Testsieger
Tour Magazin Wertung: 1,8
Feel the difference: small but profound.
The Syntace P6 Carbon Hi-Flex now offers twice the shock absorption capabilities in the riding direction as previously. Without loss of riding control and with improved oscillation damping and directional stability even when drifting around corners or when hitting harsh ruts. In comparison to the previous P6 Carbon the comfort has once again been improved noticeably while also providing a bob damping mechanism for full suspension bikes.
Infinite, perfect micro-adjustability
The two-bolt micro adjust is simply the best AND most precise angle adjustment. In the Syntace P6 we combine it with the best accessibility of bolts and real 30° pivoting range. The cold-forged 3D head is already positioned horizontally (contrary to extremely expensive “simple constructions”). And: the bolts are positioned absolutely symmetrical, exactly in the direction of force. This way it stays bomb-proof even under high loads with
Super-narrow 30mm support
On the top
The Syntace Extended Seat Adjustment design offers lots of adjustability back and forth. The key: only the stop-edge offset in relation to the middle axis defines the real offset of a seatpost, so we made the upper clamping part of the Syntace super-narrow. Because the further back the limiting Stopp-edge is located, the further you can slide back your seat.
Extra-wide 52mm support
On the bottom
The asymmetrical backwards extended seat support - Extended Rail Support - offers lots of support for the seat rails. With these far extended booms it is finally possible to use seats with light titanium rails off-road - without bending or breaking them.
Syntace Super Taper
The most elaborate carbon-fiber seatpost on the market. FEM as well as extreme runs on a testing machine (VR-3 SP-approved) lead the way to a new and load-oriented material distribution. It is not easy to manufacture but makes the Syntace P6 seatpost light and incredibly sturdy. Just the way you are used to from Syntace.
Fore and aft adjustability of saddle
What use is a strongly backwards swept seatpost head, if the seat rail clamp only allows a very limited backward adjustability of the saddle?
The only truly meaningful approach goes as follows: how far can I move my seat rails backwards measured from the front edge of the seatpost until the front bend of the seat rails dead stops on the upper part of the seat rail clamp.
Like this, we could consider the front edge of the upper seat rail clamp as the rearwards adjustability limit. Conversely, the rear edge of the upper seat rail clamp could be considered as the forward adjustability limit.
Instead of believing fairy tales, please compare yourselves as to what is really the case with your seatpost. The specification of a setback (adjustable range CENTRE) is about as useful as the wheelbase with reference to the trunk length of a car. The wheelbase can of course influence this, but does not define it. The specification of the setback (the clamping range from the centre backwards) would only be a useful and comparable specification of the adjustability, for example backwards, if all seatposts on the market had the same upper seat rail clamp. Unfortunately this is not the case. Upper clamps range from 28 - 60mm and hence a specification based on centre is completely useless for the end result.
Can oval shaped seat rails be used with the Syntace P6?
Yes, oval shaped seat rails up to a height of 11mm can be used.
Please check, that at maximum angle adjustment, there are still 6 threads (6 mm deep) inside the bolt anchors. If this is not possible for one of the two clamping bolts, you will need to order following instead of the original M6x30 P6 TitanScrew: M6x35 (Part number: 103627) and Syntace half bolt anchor (Part number: 112155).