Super light, extra rigid, very strong and compatible with handlebars up to 610mm/24” wide. Available to fit 25.4mm MTB handlebar and 26.0mm ROAD handlebar.
Syntace Force 99 MTB
Attention: Attach directly to the steerer tube of your fork. Do not use adapters or shims.
Tighten the clamp bolts to the maximum Nm torque setting detailed on the stem. If the maximum torque setting is exceeded the clamp can break!
Attention: All syntace handlebars are now further reinforced for use with 4 bolt type handlebar stems. The F99 stem is suitable for use with all Syntace handlebars which carry the following symbol:
Information about our recall of the first production series of the Syntace Force 99 you will find here.
Recommended handlebars for this stem you will find in the compatibily list.
Syntace's proprietary combination of a new, high-strength, forgeable alloy and true 3-D forging results in the lightest bombproof stem in existence!
Special 200° Head
makes the best “bed” for your handlebar, by reducing bar flex. You’ll get increased handlebar strength and fatigue life without any extra weight.
Road/MTB Versatility
Available for both ROAD (26.0mm) and MTB (25.4mm) handlebars.
Titanium Screw Option
Six extremely hard titanium screws, specially produced by Syntace will lighten your F99/139 stem by 8 grams and will not corrode even in salt water conditions.
VR-3 approved
according to VR-3 downhill standard DH 2002.4, the world‘s toughest test standard for handlebars and stems.
Attention: Attach directly to the steerer tube of your fork. Do not use adapters or shims.
