Megaforce 2
Cross-sectional profile
  Setting new standards. The Megaforce2 design was optimized from ground up, to give exceptional torsional stiffness combined with minimal weight when used in combination with wide and super wide 31.8 mtb bars and with the new tapered (E2) steerer tubes with 1 1/8th stem interface diameter.
   
 
 
  Dateigröße: 1497 kB
   
 
  The shortest stem of the world for the widest bars on the market. And light as a feather…
 
   
     
 
 
     
  Recommended handlebars for this stem you will find in the compatibily list.  
     
 
 
  Delivery  
  Megaforce 2 stem, titan screws, Litecap (w/o screw)  
  Lengths & Weights (stem)  
  30 mm: 107 g  
  40 mm: 113 g  
  50 mm: 122 g  
  60 mm: 127 g  
  70 mm: 132 g  
  80 mm: 145 g  
  Steerer Ø  
  28.6 mm (1 1/8")  
  Steerer Height  
  36 mm  
  Minimum Insert (steerer)  
  30 mm  
  Handlebar Clamp Ø  
  31.8 mm  
  Angle  
  6° FlipFlop  
  Color  
  Raceblack  
     
  Price (GERMANY):  
  118,00 ?  
   

Related Products
Force 109
FlatForce
The result
Similar torsional stiffness values as our large volume Force 1.5, but at the same time less weight than our already light weight Superforce - 132g at 70mm stem length. Low profile for a minimum built height above the headset, and the first of its kind to be greater in width than profile height, dimensions being 36 x 42 mm.

Precision and comfort
Noticeably preciser steering control with super wide bars. Reduction of “swaying tendancy” (out-of-phase) while retaining the dampened vertical compliance (in-phase) at the bar ends. The new combination of extreme proportioned cross sectional stem body, while possessing a tangential transition of the 1 1/8th fork interface clamp allows a deeper recessing of the stem clamping bolts facing the knees than previously possible.

Perfect for everyone
Superfit sizing system with 6° (with FlipFlop design) stem angle - ideal for the current frame’s reduced steerer tube lengths geometries. Six fine tuning lengths from 30 mm to 80 mm in 10 mm (!) intervals.

VR-3 “The Red Monster” tested
The worldwide toughest testing machine for bars and stems. Tested with bars up to 800 mm width and approved with no restrictions (rider weight or usage). Tuned with Ti bolts, own form fitting Megaforce-Litecap as well as further “plug and play” tuning components, which are still in preparation.