The first seatpost that is easy on the seat and the user with a really useful range of adjustments. Adjust backwards - like a bent seatpost…and forward: like a straight seatpost.
This exciting and clean at the same time can a infinitely adjustable seatpost be.
Wide range of adjusting range included.
Infinite, perfect micro-adjustability
Syntace ERS-Head
The Syntace P6 with diameter 34.9 mm has an additional internal thin aluminium core (0,8 mm). This solves the problem of low buckling strength which arrises with large diameter carbon seatposts.
Weights
at 34,9-Ø
284 g at 450 mm length
274 g at 420 mm (reduced length)
244 g at 350 mm (reduced length)
at 31,6-Ø
228 g at 400 mm length
205 g at 350 mm length
195 g at 280mm length
at 30,9-Ø
228 g at 400 mm
215 g at 350 mm (reduced length)
195 g at 280 mm (reduced length)
at 27,2-Ø
228 g at 400 mm length
212 g at 350 mm (reduced length)
209 g at 280 mm length
The Syntace Extended Seat Adjustment design offers lots of adjustability back and forth. The key: only the stop-edge offset in relation to the middle axis defines the real offset of a seatpost, so we made the upper clamping part of the Syntace super-narrow. Because the further back the limiting Stopp-edge is located, the further you can slide back your seat.
Extra-wide 53mm ERS-support on the bottom
The asymmetrical backwards extended Syntace ERS seat support - Extended Rail Support - offers lots of support for the seat rails. With these far extended ERS booms it is finally possible to use seats with light titanium rails off-road - without bending or breaking them.
Infinite, perfect micro-adjustability
The two-bolt micro adjust is simply the best AND most precise angle adjustment. In the Syntace P6 we combine it with the best accessibility of bolts and real 40° pivoting range. The cold-forged 3D head is already positioned horizontally (contrary to extremely expensive “simple constructions”). And: the bolts are positioned absolutely symmetrical, exactly in the direction of force. This way it stays bomb-proof even under high loads with less weight.
Syntace Engineering
The most elaborate carbon-fiber seatpost on the market. FEM as well as extreme runs on a testing machine (VR-3 SP-approved) lead the way to a new and load-oriented material distribution. All parts of the head are cold-forged from 7075 aluminum, deep ribbed and coupled through ?cardanic“ ellipsoid anchors. It is not easy to manufacture but makes the Syntace P6 seatpost light and incredibly sturdy. Just the way you are used to from Syntace.
Seat height scale
Thanks to the scale covered by an epoxy coat you will find again the correct seat height after a downhill with lowered seatpost.
The Syntace P6 with diameter 34.9 mm has an additional internal thin aluminium core (0,8 mm). This solves the problem of low buckling strength which arrises with large diameter carbon seatposts.
